Petroleum and petroleum chemical industry fast development ask more for the production technology level and production robotization level. The low level operation affects the comprehensive benefit. Oil tank is the right example. At present, the oil tank dehydration is operated by human beings and it can not control the separation between oil and water and it can cause the waste of oil and pollution to the environment.

 

 

     LTQS type tank automatic evaporator is the new generation products researched by our company. It was made up by non-corrosive steel. It has reasonable design, simple structure, large amount of water, fast oil backing rate and convenient use. The product can be used in petroleum industry and petroleum chemical industry and it can replace the traditional oil tank.

 

The development of the automatic evaporator is great contribution to the improvement of the production technology and automatic level in the oil production industry. It can reolace the oil tank manpower operation and can control the separation between oil and water. It over comes the dangerous matters.

 

    The product can be fixed under the oil tank. The drainage will be start be the mechanical force generated by buoyancy and closed automatically. It can avoid manpower, resources coast and explosive-proof. It can still reduce the pollution and working strength. It has wide use scope, convenient installation, great safety and high reliability.

 

   

Function: it can be installed under the oil tank or above the drain outlet.

Use: it can be used for the petroleum and petroleum chemical industry production equipments.

                               

 

1,  the dehydrating theory broke out the oil tank self water cutting theory.

2,  It solve the problem that the oil can not be back by itself.

3,  After the dehydrating, the evaporator will keep at certain water level to ensure the oil can not flow.

4,  Completed function and wide use scope.

5,  Without easy-damage parts. The use life is long and it is easy to install.

 

 

1, operation pressure: ≤0.6Mpa

2, operation temperature: ≤80°C

3, Nominal water cutting amount: 10t/h below£¬12t/h, 15t/h, 20t/h, 30t/h¡£

4, Oil amount≤10mg/L

5, range of application: it can be used in various liquid separation of oil and other chemicals.

 

 

Model	H(mm)	L(mm)	Water cutting amount t/h	Diameter of water entering pipe	Diameter of water existing pipe	Diameter of canister(mm)	Suitable Medium
LTQS-10	660	724	≤10	Dg80	Dg50	Φ500	Used for clean oil or liquid chemical raw materials
LTQS-12	680	724	12	Dg80	Dg50	Φ500	Used for clean oil or liquid chemical raw materials
LTQS-15	700	724	15	Dg80	Dg50	Φ500	Used for clean oil or liquid chemical raw materials
LTQS-15A	700	824	15	Dg80	Dg50	Φ600	Used for clean oil or liquid chemical raw materials or crude oil
LTQS-20A	720	824	20	Dg100	Dg50	Φ600	Used for crude oil, residuum and wax oil
LTQS-30A	720	824	30	Dg100	Dg50	Φ600	Used for crude oil, residuum and wax oil

 

1, The valve should use dissection connection.

2, The tube between oil tank and evaporator should be leveling.

3, The elbow of oil tank water existing pipe should be removed.

4, In cold place or for the viscosity oil, the self-vertical temperature control valve should be settled.

5, Cold place oil tank pipe and oil back line should be heated and the thermal should be kept.

6, Large capacity oil tank or oil contains high amount of water.

7, Clean the evaporator timely.

8, Check the evaporator timely and change the sealed ring in time.

9, Notice the gas exhaust.

10, It is normal for the evaporator not to work after meeting the emulsion layers.

 

|Water cutting machine

|Automatic evaporator

|Oil tank automatic water cutting machine

|Storage tank automatic evaporator